by kekojeda kekojeda

SLEEVE FOR DIRECT ENGRAVING

Gravure Printing Sleeve Ready to be Engraved and Chromed. Copper Coating is not needed.

Main Properties

  • Ultra-lightweight, weighing up to 4kg..
  • Easy storage as it does not require large structures as those used for traditional steel cylinders.
  • Very agile system for design changes, new works and short runs for seasonal promotions, etc.
  • It reduces significantly the logistics and transport costs due to its low weight and easy handling.
  • Excellent dimensional stability considering it is a metal.
by kekojeda kekojeda

POLYMER AIR MANDREL

Lightweight Air Mandrel made of epoxy-based composite material to be mounted in combination with thin metallic sleeves.

Main Properties

  • Weighs between 40% and 70% less than a conventional cylinder, depending on the size.
  • The exclusive alveolar structure confers the product an optimum balance between strength, stability and low weight.
  • Resistant to aggressive solvents.
  • Completely encapsulated, it avoids the absorption of solvents and moisture. This feature also enables the in situ cleaning with solvents in printers that offer this service.
  • Suitable for high speed Printing.
by kekojeda kekojeda

COPPER PLATING LIGHTWEIGHT CYLINDER

Ultra-light cylinder for gravure printing, with metal shaft and body made of epoxy-based composite, coated with copper

Main Properties

  • Weighs between 30% and 50% less than a conventional steel
    cylinder, depending on the size.
  • Body made of epoxy-based composite material.
  • Plated with electrolytic copper 350 microns thick.
  • Steel shaft.
  • Resistant to aggressive solvents.
  • Excellent dimensional stability due to the exclusive alveolar structure that confers the product an optimum balance between strength, stability and low weight.
by kekojeda kekojeda

ANILOX COVER

Flexible Anilox cover with smooth interior, label and identification number for a better data control.
Provided with a rubber diaphragm for better Anilox fixation when handling it.

by kekojeda kekojeda

LIGHTWEIGHT AIR MANDREL

Lightweight air mandrel made of epoxy-based composite material to be used as sleeve holder.
Used for conventional flexo machines replacing the heavy steel cylinders.

Ask for additional information.

Main Properties

  • Resistant to aggressive solvents. Completely encapsulated, it avoids the absorption of solvents and moisture.
  • The exclusive alveolar structure confers the product an optimal balance between strength, stability and low weight wich in turn reduces to a minimum the vibrations caused by the rebound effects.
  • Suitable for high speed printing.
  • Longer lifetime due to the excellent quality of its materials.
  • Optimal attachment of the double-sided adhesive tape.
by kekojeda kekojeda

CARBOCYL MIX BRIDGE SLEEVE

Bridge Sleeve made of epoxy-based carbon fiber and fiberglass.
Excellent dimensional stability and very low weight due to the alveolar design developed for high thicknesses.

Main Properties

    • Optimized version of the Statcyl Bridge Sleeve with improvements in the conduction of the static electricity. In combination with the Statcyl sleeves enables the proper discharge of the static electricity that is generated during the printing process.
    • Resistant to aggressive solvents. Total encapsulation, avoids the absorption of solvents and humidity. This feature also enables the in situ cleaning with solvents in printers that offer this service.
    • The exclusive Alveolar Structure confers the product an optimal balance between robustness, stability and low weight.
      • Suitable for high-speed printing due to the monolithic design, excellent attachment and optimal cushioning properties of the internal elastomer layer.
      • Smooth mounting and excellent attachment to the printer shaft.
      • Optimal surface air distribution that enables an easy mounting / demounting of the sleeves without compromising a proper attachment to the bridge sleeve.
by kekojeda kekojeda

CARBOCYL PREMIUM BRIDGE SLEEVE

Bridge Sleeve made of carbon fiber and epoxy resins.
Due to the outstanding properties of the carbon fiber, this Bridge sleeve has the lowest weight of its kind, excellent mechanical properties, high dimensional stability and optimal discharge of the static electricity.

Main Properties

  • The carbon fiber enables to reach the lowest possible weight preserving excellent mechanical and dinamical properties as well as an optimal discharge of the static electricity.
  • Resistant to agressive solvents. Total encapsulation, avoids the absorption of solvents and humidity.
  • Lateral sides protected by anti-impact material
  • Steel ring to protect the interior of the Bridge Sleeve.
  • Suitable for high-speed printing machines due to the monolithic design, excellent attachment and optimal cushioning properties of the internal elastomer layer.
  • Smooth mounting and excellent attachment to the printer shaft.
  • Optimal surface air distribution that enables an easy mounting / demounting of the sleeves without compromising a proper attachment to the Bridge Sleeve.
by kekojeda kekojeda

STATCYL CONDUCTIVE BRIDGE SLEEVE

Bridge Sleeve made of epoxy-based composite material and electrically conductive carbon that in combination with the Statcyl Sleeves enables a proper discharge of the static current that is generated during the printing process.
Excellent dimensional stability and very low weight due to the alveolar design developed for high thicknesses.

Main Properties

    • Conductive coating made of epoxy-based carbon to enable electrostatic discharge.
    • The exclusive alveolar structure confers the product an optimal balance between strength, stability and low weight.
    • Resistant to aggressive solvents. Completely encapsulated, it avoids the absorption of solvents and moisture.
    • Lateral sides protected by anti-impact material.
  • Steel ring to protect the inside of the Bridge Sleeve.
  • Suitable for high speed printing due to its monolithic design, excellent attachment and optimal cushioning properties of the inner elastomer layer.
  • Smooth mounting and excellent attachment to the printer shaft.
  • Optimal surface air distribution that enables an easy mounting / demounting of the sleeves without compromising a proper attachment to the bridge sleeve.
by kekojeda kekojeda

STATCYL CONDUCTIVE SLEEVE

Plate Sleeve made of epoxy-based composite material and static conductive carbon, resistant to aggressive solvents and high dimensional stability.

Main Properties

  • Resistant to aggressive solvents.
  • Completely encapsulated, it avoids the absorption of solvents and moisture. This feature also enables the in situ cleaning with solvents in printers that offer this service.
  • Coated with carbon-based material which enables a proper discharge of the static electricity that is generated during the printing process.
  • The exclusive alveolar structure confers the product an optimal balance between strength, stability and low weight.
  • Lateral sides protected by anti-impact material.
  • Suitable for high speed printing due to its monolithic design, excellent attachment and optimal cushioning properties of the inner elastomer layer.
  • Surface that allows an optimal attachment of the tape and easy removal after printing.
by kekojeda kekojeda

EPOCYL SLEEVE

Plate Sleeve made of epoxy-based composite material. Resistant to aggressive solvents and high dimensional stability.

Main Properties

  • Aggressive Solvents Resistance. Completely encapsulated, it avoids the absorption of solvents and moisture. This feature also enables the in situ cleaning with solvents in printers that offer this service.
  • The exclusive alveolar structure confers the product an optimum balance between strength, stability and low weight.
  • Lateral sides protected by anti-impact material.
  • Suitable for high speed printing due to its monolithic design, excellent attachment and optimal cushioning properties of the inner elastomer layer.
  • Surface that allows an optimal attachment of the tape and easy removal after printing.